Adhesive , grouts , repairing materials

Written by Super User on . Posted in Adhesive , grouts , repairing materials

  • Crus-sil Pavement

    This powder is a cement-based product which is prepared using the formulation and the best materials. This product is designed to make the surface resistant after it is sprayed on fresh concrete. This powder contains granule sand particles ...Read more
  • Admixture grout CX-35

    Icon 09
    This expanding grout is used to fill the gaps, large pours, and the space under the plates ofload transfer. The most important advantage of this grout has to do with its expanding property based on which all the empty spaces get ...Read more
  • Water proof polymer cements (H)

    Icon 09
    This product is made based on strengthened cement by strong chemical polymers which are highly resistant against water. They are made based on the cutting-edge technology of polymeric cement and are presented in various ...Read more
  • Water proof polymer cement

    Icon 09
    This product is made based on strengthened cement by strong chemical polymers which are highly resistant against water. They are made based on the cutting-edge technology of polymeric cement and are presented in various colors that give special ...Read more
  • Admix waterproof

    Icon 09
    The liquid type of this product disperses the cement in the concrete and creates a dense, and homogenous concrete which is highly resistant against moisture penetration, sulfate chemical assault, and chlorines. ...Read more
  • Admix prime 109

    Icon 09
    This primer is a thick paste in the form of an emulsion whose diluted type can be used with water. After using, its water gets evaporated and creates a flexible and resistant stratum that does not dissolve in water. It doesn’t ...Read more
  • Concrete Adhesive

    Icon 09
    This primer is a thick paste in the form of an emulsion whose diluted type can be used with water. After using, its water gets evaporated and creates a flexible and resistant stratum that does not dissolve in water. It doesn’t ...Read more
  • Cano Tile Adhesive (Normal)

    Icon 09
    A cement and   silica-based product and hydraulic additives that bring about high performance and adhesion. This adhesive is suitable for tiling the floors and walls of the buildings due to its appropriate grading, high adhesion ...Read more
  • Pecu Tile Adhesive

    Icon 09
    A product based on cement, specific aggregates, and additive materials and combined resins that make high adhesion and efficacy. This product, having high efficiency, is appropriate for tiling the swimming pools and the beds that are in ...Read more
  • Porselan tile adhesive

    Icon 09
    A product based on cement, specific aggregates, and additive materials and combined resins that make high adhesion and efficacy and is resistant against erosion. This product is comprised of various adhesive materials that are appropriate for tiling inside and outside ...Read more
  • Plaflex Tile Adhesive

    A product based on cement, specific aggregates, and hydraulic additives and polymeric   elasticizes that make high adhesion and elasticity. This flexible tile adhesive with appropriate granule, high adhesion and flexibility ...Read more
  • Fixet Adhesive

    Icon 09
    A product based on cement, specific aggregates, additives, and mixed resins that make high adhesion and efficiency and is resistant against environmental erosion. This adhesive contains various adhesive composites ...Read more
  • Band Color

    A color mortar containing additives, mineral fillers and additive resins with adhesive properties which is so soft and flexible. This product is appropriate for banding 5 to 15 mm bands among all kinds of tiles on the floor and the ...Read more
  • Poly coat coatings

    Icon 09
    This product is made of cement, polymer and some minerals and is mostly used in inside and outside facades of the buildings. Its polymeric property in combination with cement creates good adhesion and linking. This product, ...Read more

Poly Coat (T1) Coatingies

Written by Super User on . Posted in Adhesive , grouts , repairing materials

 

 

Description

This product is made of cement, polymer and some minerals and is mostly used in inside and outside facades of the buildings. Its polymeric property in combination with cement creates good adhesion and linking. This product, having waterproof quality, shows a permanent clean surface that is available in various colors.

Advantages and Applications

·        Solid without cracks

·        Appropriate adhesion to the underneath surfaces

·        High mechanical resistance concerning low thickness

·        Applicable from 1 to 4 mm thicknesses in one stage

·        Light utilization capability after two hours

·        Without volume slump and fraction

·        Leveling the surfaces with 1 mm tolerance

·        Environmental friendly

·        Different implementation Physical state Physical state Physical state Physical state

PISTOLE: after preparing the product, and mixing it with water (3 modules of the powder and 1 module of water) pour the paste into the PISTOLE container and apply on the wall with circular movements.

Roller: after preparing the product and mixing it with water (2.5 to 3 modules of powder, and 1 module of water) put the roller inside the paste and apply it on the surface.

Dosage

 Concerning the roughness or smoothness of the surface the dosage is variable between 2 to 4kg in 1 square meter.

How to use

Gently add 4 modules of the powder to 1 module of water and mix thoroughly to obtain an even product.

Various kinds of finish

Rough finish: allow the mortar to dry after execution (4 to 15 hours with regard to the given bedding and weather conditions), then scratch the surface with a proper instrument (toothed trowel, and saw) and finally wash it gently with a soft brush so that nothing remains on the surface.

Sponge finish: rub a wet sponge on the half-dried mortar to get a soft color finish.

 

Specifications

Appearance: powder

Color: colorful

Hardness: 5 MOH

It has UV

Approximate workability: 2 kg in each square meter for 1 mm

 

The amount of it mixture with water for applying by trowel: 1 module of water with plastic cover in a roofed place out of sunlight.

 

Band Color

Written by Super User on . Posted in Adhesive , grouts , repairing materials

 

Description

A color mortar containing additives, mineral fillers and additive resins with adhesive properties which is so soft and flexible. This product is appropriate for banding 5 to 15 mm bands among all kinds of tiles on the floor and the walls.

 

Advantages and Applications

·        Having high hardness

·        Having various colors

·        Getting cleaned easily

·        Having sotiny texture

·        Low water absorption

·        Resistant against crack and erosion

·        Appropriate for using inside and outside the building

·        Gently add 4 kilograms of the powder to 1 liter of water and mix it adequately to make a  homogenous paste. Then wait for 5 minutes so that the polymers are cured well. Then    apply them using a spatula.

 

Specifications

Appearance: powder

Color: various colors

Packaging and maintenance conditions

Keep in 4-ply 25-kg packages with plastic cover in roofed places out of sunlight.

 

Safety points

To prevent inhaling cement materials, use cloth masks.

 

Fixet Adhesive

Written by Super User on . Posted in Adhesive , grouts , repairing materials

 

Description

A product based on cement, specific aggregates, additives, and mixed resins that make high adhesion and efficiency and is resistant against environmental erosion. This adhesive contains various adhesive composites that are proper for natural stones like granite, marble, travertine, and all other kinds of stones. It is applicable on the walls and floors inside and outside the buildings.

Advantages and Applications

·        Appropriate for gluing low-permeable stones, tiles and ceramics.

·        Having the ability to set the stones and tiles due to their delay in getting dried.

·        High primary adhesive power

·        Appropriate gluing ability with less porous materials like granite and ceramic.

·        Applicable inside and outside the building.

·        Applicable on the walls and floors of the buildings

 

Dosage

Around 4 kilograms for 1 square meter of ordinary surfaces.

 

How to use

Gently add 4 kilograms of the powder to 1 liter of water and mix it adequately to make a   homogenous and solid paste. Then the paste is ready to use.

Wait for 5 minutes and then mix it again. Rub the paste, with a maximum 2mm thickness, on the given surface by a trowel. Disperse the paste with a toothed trowel to regulate its thickness. Put the tile on the paste, press it and turn a little to make sure that the paste is completely attached to the tile.

Notice: To have a better performance, put the tile on the paste immediately after it is rubbed on the surface.

 

Specifications

Appearance: gray powder

Bulk density: 1.5 ± 0.2 g/cm

Paste density: 1.4 ± 0.2g/cm

Shelf time:  approximately 2hours (concerning weather conditions)

Heating and cooling resistance: between -30 to + 70 degrees of centigrade

Appropriate implantation thickness: between 2 to 10 mm

Flexibility property: excellent

Packaging and maintenance: Keep in 4-ply 25-kg packages with plastic cover in roofed places out of sunlight for one year.

 

Quickset Tile Adhesive

Written by Super User on . Posted in Adhesive , grouts , repairing materials

Description

A product based on cement, specific aggregates, and additive materials and combined resins that make high adhesion and efficacy and is resistant against erosion. This product is comprised of various adhesive materials that are appropriate for tiling inside and outside the building and inner walls.

Advantages and applications

·        Appropriate for wall tiling and the floors inside or outside the buildings.

·        Appropriate for sticking various tiles and porcelain ceramics.

·        As this adhesive can preserve the moisture, there is no need to moisturize the bed or tiles.

·        Having the capability of setting the tiles of without caulk due to its delay in getting dry.

·        Without slippage and having high primary adhesive power

·        Having high adhesive power and having perfect sticking ability and complete harmony with the ceramics whose water absorption is low.

Dosage

The rougher a surface is, the higher is the dosage. For a normal surface of 1 square meter 4 kilograms is needed.

How to use

 After adding 4 kilograms of the powder to 1 liter of water, mix it with hand or mechanical mixer so that you make a homogenous and ready to use product. Wait for 5 minutes and then mix it again. Rub the paste, with a maximum 2mm thickness, on the given surface by a trowel. Disperse the paste with a toothed trowel to regulate its thickness. Put the tile on the paste, press it and turn a little to make sure that the paste is completely attached to the tile.

Notice: to have a better performance, put the tile on the paste immediately after it is rubbed on the surface.

 

Specifications

Appearance: white or gray powder

Bulk density: 1.6 ± 0.2 g/cm

Paste density: 1.8 ± 0.2g/cm

Shelf time:  approximately 2 hours (concerning weather conditions)

Approximate efficiency: 4 kg/m2

 

Packaging and maintenance:

Keep in 4-ply 25-kg packages with plastic cover in roofed places out of sunlight. 

 

UA-53860587-6